Steel & Metal Fabrication Applications for Onsite Nitrogen Generation

Laser Cutting and Onsite Nitrogen Generation

Laser cutting or profiling is a well established production method in the steel and metals fabrication industry. It enables complex and precise cutting of steel and aluminium sheets to a very high quality finish which would previously have been prohibitively expensive to machine cut. It enables the manufacturer to cut small diameter holes with complex detail and good edge quality in either sheet, plate, tube or box section metal items.

The process is blanketed with high pressure nitrogen as a shielding effect which eliminates oxidisation and improves edge quality and other finishing procedures. It also ensures that stainless steels does not lose its corrosion resistance and aluminium items have a burr-less finish.

The laser beam melts the material and in addition to its blanketing benefits, the high pressure nitrogen blows away the molten material and forces the metal to harden quickly.

Welding and Brazing with Onsite Nitrogen Generation

Using a nitrogen based atmosphere in welding and brazing processes improves the quality of the welded steel or metal and minimises the risk caused by potentially harmful fluxes.
For a rapid response contact: t. 0191 477 0060 e. info@iatt.co.uk

Independent Air Treatment Technology Ltd.
Unit 11 Saltmeadows Trade Park
Neilson Road, Gateshead, Tyne & Wear, NE10 0EQ
t. 0191 477 0060 | f. 0191 477 2228
e. info@iatt.co.uk | www.iatt.co.uk
© Copyright 2015 - IATT
Co. Reg: 07115308 | VAT Reg: 982712988


Website by Thinkpad Creative